|
Our experience in the fluids industry has made INDUSTRIAL PUMPING the preferred supplier of pumps, filtration and fluid control equipment, to many world respected mines, councils, oil palm mills, sugar mills, public utilities, and factories, in Australia, Papua New Guinea, and South Pacific Islands.
|
Sterling SIHI
Specialised Pumps
 |
High Temperature Circulation Pumps
The SIHI ZEN series volute pumps are specialised heat transfer and circulation pumps. They are primarily used for circulation of hot water in closed pipe and vessel systems.
Horizontal, single-stage volute pumps in back pull out construction, with uncooled mechanical seal.
The series ZEN has been designed for the trouble free handling of hot water up to 230 °C and is distinguished by:
• A double heat barrier that causes an optimal energy consumption by the pump and reduces the temperature level in the mechanical seal chamber to less than 100 °C without an external cooling circuit. The service life of the mechanical seal increases considerably.
• A special design that automatically leads accumulation of gas to the exhaust. Consequently the dry operation of the mechanical seal can be excluded.
• The back pull out construction that makes possible the disassembly of the complete bearing unit towards the drive side without loosening the pump casing out of the pipe system. If a spacer coupling is used even the motor must not be loosened.
|
 |
Industrial Centrifugal Pumps
The SIHI SuperNova range of pumps has been developed for pumps that meet EN 733 / DIN 24255 and ISO 9908. Some designs meet EN 22858 / DIN 24256. They are available in a number of different materials and are suitable for a wide range of industrial applications
|
 |
High Pressure Multistage Pumps
The SIHI range of horizontal or vertical, ring-section multistage pumps are for high pressure applications and meet the technical requirements of ISO 5199 / EN 25199.
|
 |
Chemical Process Pumps
SIHI chemical process pumps, highly corrosion resistant centrifugal pumps, are magnetically driven or incorporate a mechanical seal and are all supplied in a close-coupled configuration. The units are designed to pump relatively low flow rates that normally fall below the standard ISO 2858 range.
|
 |
Side Channel Pumps
SIHI Side Channel Pumps are horizontal and self-priming, side channel pumps with a NPSH inducer stage suitable for handling liquids which do not contain solid or abrasive matter. The range comprises of six sizes each with 1 to 8 hydraulic stages whereby an optimum rating is obtained, ensuring the pump selected meets the required capacity and head.
|
 |
Gear Pumps
SIHI GearPlus are horizontal gear pumps with an internal idler gear in mesh with a main rotor.
|
 |
Seal less Liquid Pumps
A large number of pumping processes, especially in the chemical industry, require pump sealing systems adapted to the particular application. In most applications these requirements are satisfied by pumps with magnetic couplings that by means of a motorcan are statically sealing the pump shaft from the atmosphere.
Seal less Process pumps are used for many different applications including the handling of corrosive, abrasive, toxic and foul smelling liquids, with Leak free with magnetic couplings.
For more than 25 years Sterling SIHI has been supplying pumps with magnetic couplings for applications in process engineering. The experience gained and the continuous development of the modular system have enabled Sterling SIHI to successfully use hermetically sealed drivers for the complete programme of liquid pumps.
|
|
